Maintenance Management - 7

LIST OF ATTEMPTED QUESTIONS AND ANSWERS
True/False
Question Maintenance department evaluation can be done by only one
method.
Correct Answer False
Your Answer False
Multiple Choice Multiple Answer
Question What are the content of initial cost?
Correct Answer Taxes , Basic Cost , Installation Charges
Your Answer Basic Cost , Installation Charges , Taxes
Multiple Choice Single Answer
Question Who, due to fear of losing the maintenance contract, may not
reveal enough technical information?
Correct Answer Vendor
Your Answer Vendor
True/False
Question Defect analysis gives us information about commonly faced
problems.
Correct Answer True
Your Answer True
Select The Blank
Question In India, most of the industrialist base their decisions to purchase
equipment on the ________.
Correct Answer Price of the equipment
Your Answer Price of the equipment
Match The Following
Question Correct Answer Your Answer
Time taken As low as possible As low as possible
Automation Decrease break down
time
0.99
Utilization of machine As high as possible As high as possible
Equipment selection Purchase dept Purchase dept
Multiple Choice Single Answer
Question Which document is called horoscope of that particular equipment
which can tell a lot about it to experienced engineer?
Correct Answer History Card
Your Answer History Card
Multiple Choice Multiple Answer
Question Which of the following are the constituents of fire?
Correct Answer Fuel , Heat , Oxygen
Your Answer Fuel , Heat , Oxygen
Multiple Choice Multiple Answer
Question Maintenance Control system is used to check following?
Correct Answer Correct starting time of Maintenance activities , Maintenance
planning , To get correct feedback
Your Answer Correct starting time of Maintenance activities , Maintenance
planning , To get correct feedback
Multiple Choice Multiple Answer
Question The maintenance department is responsible for :-
Correct Answer Protection of building and plant , Increasing utilization of plant ,
Controlling maintenance cost
Your Answer Protection of building and plant , Increasing utilization of plant ,
Controlling maintenance cost
Multiple Choice Single Answer
Question Normally Ratio of Unplanned work to planned work is given in :-
Correct Answer Maintenance Report & Analysis
Your Answer Maintenance Report & Analysis
Multiple Choice Single Answer
Question Which type of inspection is to be carried when the machine is
operating?
Correct Answer One-time inspection
Your Answer Sample inspection
True/False
Question Reliability is the probability that product will perform its intended
functions under desired operating conditions over a specified
period of time.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question The flat part in the bath tub curve is called :-
Correct Answer Normal Life Time
Your Answer Normal Life Time
True/False
Question Hazardeous chemicals inventory should be kept at minimum
level
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Which of the following is process variable which can affect the
equipment?
Correct Answer Flow rate of process fluid
Your Answer Flow rate of process fluid
Multiple Choice Multiple Answer
Question Following are the part of service installations in the buildings?
Correct Answer Asset register , Technical manuals , Suppliers manuals
Your Answer Asset register , Technical manuals , Suppliers manuals
Multiple Choice Single Answer
Question Which analysis gives information about faced problems, and
solution to avoid it?
Correct Answer Defect Analysis
Your Answer Defect Analysis
Select The Blank
Question Correct quantity of lubricant assures that lubricant will be used in
optimum quantity and will result in ________.
Correct Answer Economy
Your Answer Thermal stability
Multiple Choice Single Answer
Question The supplier should be competent enough to estimate & provide
means of reducing :-
Correct Answer Down time as minimum as possible
Your Answer Wear out as minimum as possible
Select The Blank
Question In Japan & Western countries equipment discarded after about
________ years.
Correct Answer 7
Your Answer 5
Select The Blank
Question The manufacturing time for spare parts can vary from________.
Correct Answer Zero to one year
Your Answer 1 day to 8 days
Multiple Choice Multiple Answer
Question What are the basis on which training programmes are designed?
Correct Answer Needs of Organisation , Type of Organisation , Category of
Pupils
Your Answer Needs of Organisation , Type of Organisation , Top Management
Multiple Choice Multiple Answer
Question Some of the elements of inventory carrying cost are :-
Correct Answer Storage expenses , Insurance charges , Cost of deterioration
Your Answer Storage expenses , Insurance charges , Cost of deterioration
Select The Blank
Question ________ should be allowed in case of real emergency.
Correct Answer Contingency purchasing
Your Answer JIT purchasing
Multiple Choice Multiple Answer
Question Which are probable period of annual shut Downs in the Year?
Correct Answer Demand for a product is Low , Festival Seasons , Supply of Raw
material is nil.
Your Answer Demand for a product is Low , Festival Seasons , Supply of Raw
material is nil.
Select The Blank
Question Reliability can be expressed as probability between________.
Correct Answer 0 to 1
Your Answer 0 to 100
True/False
Question Animal fats can be used as lubricants.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Master list of all the supplier should consist of information such
as :-
Correct Answer Name, address, telephone, fax nos , Financial status , His rating
for the year.
Your Answer Name, address, telephone, fax nos , Financial status , His rating
for the year.
True/False
Question Indian Standards Institution is Indian body of standardization.
Correct Answer True
Your Answer True
True/False
Question Audio cassettes are the part of tools of training.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question What is necessary to avoid major breakdowns?
Correct Answer Maintenance at right time
Your Answer Maintenance at right time
Multiple Choice Multiple Answer
Question What type of details are given in Work order?
Correct Answer Specifications , Drawings , Manuals issued
Your Answer Specifications , Drawings , Manuals issued
True/False
Question Handling instruction is transportation instructions.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question What type of task it is to repair & maintenance fire fighting
system?
Correct Answer Repetitive task
Your Answer Single contract task
True/False
Question Proper communication with related departments can result in
increased cost of spare.
Correct Answer False
Your Answer False
Multiple Choice Multiple Answer
Question What type of support equipments are required in Maintenance?
Correct Answer Tools , Spare Parts , Test Equipments
Your Answer Tools , Spare Parts , Test Equipments
Match The Following
Question Correct Answer Your Answer
Grease cups lubrication Every week Every week
Gear box sumps
lubrication
Every six months Every six months
Electrical motor bearing
lubrication
Every year Every year
Oil nipple lubricated parts
lubrication
Every day Every day
Multiple Choice Multiple Answer
Question The performance of maintenance is indicated by :-
Correct Answer Low cost , Low down time , More uptime
Your Answer Low cost , Low down time , More uptime
Multiple Choice Single Answer
Question Lubrication helps in :-
Correct Answer Increase life of wear and tear parts
Your Answer Increase life of wear and tear parts
Select The Blank
Question Availability of ________ equipment is considered while deciding
maintenance system.
Correct Answer Stand by
Your Answer Stand by
Select The Blank
Question ________ ratio should be as high as possible.
Correct Answer Planned maintenance work
Your Answer Maintenance cost percentage to total sale
Select The Blank
Question The correct procedure is applied there is less chance of any
________.
Correct Answer Mistakes
Your Answer Mistakes
Multiple Choice Single Answer
Question Who is responsible for the design of proper maintenance
system?
Correct Answer Maintenance manger
Your Answer Maintenance manger
Select The Blank
Question Spare part lists will be comprehensive for complex equipment
with section wise details along with ________.
Correct Answer Order code numbers
Your Answer Part number
True/False
Question Preventive maintenance program reduces overall maintenance
cost which also include spare cost.
Correct Answer True
Your Answer True
Select The Blank
Question The ________ is done to check performance efficiency of a
plant.
Correct Answer Technological Review
Your Answer Control Quality