Searching for JOBS: http://naukrimantra.blogspot.com
Multiple Choice Single Answer
Question
One of the sophisticated operations research techniques used in material planning is
Correct Answer
Dynamic programming
Your Answer
Dynamic programming
True/False
Question
Job life is one of the factors that influence Process Planning
Correct Answer
True
Your Answer
True
Multiple Choice Multiple Answer
Question
Following are some of the Principles of Management advocated by F W Taylor
Correct Answer
Selection of best worker for each particular task , Division of work between worker and management , Training and development of the workmen
Your Answer
Selection of best worker for each particular task , Division of work between worker and management , Training and development of the workmen
Multiple Choice Single Answer
Question
Product layout is employed for manufacturing following products
Correct Answer
refrigirators
Your Answer
ships
Select The Blank
Question
Work study is also called ________ study
Correct Answer
Time and Motion
Your Answer
Job
Multiple Choice Multiple Answer
Question
Which of the following situations demand the technical consideration while selecting a job for method study?
Correct Answer
Jobs having inconsistent quality , Operations inviting frequent requests from supervisors for relaxation in allowed time because of variations in materials and tool performance , Jobs in which too many man-hours are spend in checking and rechecking work
Your Answer
Jobs having inconsistent quality , Operations inviting frequent requests from supervisors for relaxation in allowed time because of variations in materials and tool performance , Jobs in which too many man-hours are spend in checking and rechecking work
True/False
Question
Quality control determines what, when, and how much to inspect while inspection actually conducts examination of goods.
Correct Answer
True
Your Answer
True
Select The Blank
Question
The ________ is the maximum percentage defective that for the purpose of sampling inspection can be considered satisfactory as a process average.
Correct Answer
Acceptable quality level
Your Answer
Producer's risk
Select The Blank
Question
The term ________ emplies the foregone profit due to inability of company to produce.
Correct Answer
Opportunity cost
Your Answer
Opportunity cost
True/False
Question
All activities must not be tied up into the network
Correct Answer
False
Your Answer
False
True/False
Question
F W Taylor devised a system for classifying motions into basic divisions called Therbligs
Correct Answer
False
Your Answer
True
Multiple Choice Multiple Answer
Question
Which of the following may be the objectives of project crashing?
Correct Answer
To achieve uniformity in requirement of resources , To complete the project in the least possible time , To reduce project cost below it's normal cost
Your Answer
To complete the project in the least possible time , To achieve uniformity in requirement of resources , To improve the labour efficiency
Multiple Choice Multiple Answer
Question
What is indicated by the hugging points lying close to mean of the process in X bar-R- control chart?
Correct Answer
Biases in measurements , Recording done without actual measurements , Improper selection of samples
Your Answer
Recording done without actual measurements , Improper selection of samples
Multiple Choice Single Answer
Question
Following is one of the techniques used for Material Planning for high value material
Correct Answer
MRP
Your Answer
MRP
Select The Blank
Question
The ________ is the probability that a good lot will be rejected by the sampling plan.
Correct Answer
Producer's risk
Your Answer
Producer's risk
Multiple Choice Single Answer
Question
One of the characterstic of layout is about the flow of material / personnel. In a good layout the flow should be
Correct Answer
Unidirectional
Your Answer
Unidirectional
True/False
Question
The event numbers as far as possible reflect the logical relationships of the activities.
Correct Answer
True
Your Answer
False
Multiple Choice Multiple Answer
Question
Material Requirement Planning is very useful in following situations
Correct Answer
Long Lead time for procurement , Several levels of assemblies in product , Long manufacturing cycle
Your Answer
Long Lead time for procurement , Several levels of assemblies in product , Long manufacturing cycle
True/False
Question
Cent percent inspection is often more practical and economical than sampling inspection.
Correct Answer
False
Your Answer
False
Select The Blank
Question
The ________ must ensure that the product satisfy the functional requirements of it's usage.
Correct Answer
Quality of design
Your Answer
Quality of conformance
True/False
Question
Both, preventive and breakdown maintenance work must be assigned to the same team.
Correct Answer
False
Your Answer
False
Multiple Choice Single Answer
Question
Following is one of the tasks of Production Control
Correct Answer
Actual issue of forms and documents
Your Answer
Actual issue of forms and documents
Multiple Choice Single Answer
Question
Process Engineer does not get sufficient time for designing tooling for most economic production run when
Correct Answer
Delivery time is less
Your Answer
Delivery time is less
Multiple Choice Multiple Answer
Question
Components of Production Management include
Correct Answer
Capacity Planning , Job Design , Production Planning
Your Answer
Capacity Planning , Production Planning , Manpower Planning
Multiple Choice Multiple Answer
Question
Which of the following products should be produced by using mass production?
Correct Answer
Refrigerator , Tyre for automobile , Television Set
Your Answer
Refrigerator , Tyre for automobile , Television Set
Multiple Choice Single Answer
Question
The process of changing inputs into outputs thereby adding some value to entity can be defined as
Correct Answer
Operation
Your Answer
Manufacturing
Select The Blank
Question
A good maintenance system is not a luxary but a ________.
Correct Answer
Necessity
Your Answer
Necessity
Multiple Choice Single Answer
Question
What is the specific name for the Gantt chart when it shows at a glance the scheduling of various operations involved in a job?
Correct Answer
Job Schedule
Your Answer
Load Chart
Select The Blank
Question
A set of activities to keep an equipment in the specified condition is called as ________.
Correct Answer
Maintenance
Your Answer
Maintenance
Multiple Choice Single Answer
Question
What do you mean by lowest possible direct cost required to complete an activity within it's crashed time?
Correct Answer
Crash cost
Your Answer
Crash cost
Multiple Choice Multiple Answer
Question
Which of the following factors decide the choice between the cent percent and sampling inspection?
Correct Answer
Nature of inspection , Natural tolerance versus design tolerance , Vendor's quality rating
Your Answer
Nature of inspection , Natural tolerance versus design tolerance , Vendor's quality rating
Select The Blank
Question
The ________ is the maintenance work initiated on a result of knowledge of the condition of an item from routine or continuous checking.
Correct Answer
Condition monitoring
Your Answer
Condition monitoring
Multiple Choice Multiple Answer
Question
Which of the following are examples of attributes?
Correct Answer
Cracks , Burrs , Texture
Your Answer
Cracks , Burrs , Texture
Multiple Choice Single Answer
Question
Which of the following is the criteria for the percentage defectives in the zone of the indecision?
Correct Answer
Lots having the percentage defective more than AQL but less than LPTD
Your Answer
Lots having the percentage defective more than AQL but less than LPTD
Multiple Choice Single Answer
Question
In mass/batch production organizations where goods are produced for stocking, Work Order is raised on the basis of
Correct Answer
Sales Programme
Your Answer
Sales Order
Match The Following
Question
Correct Answer
Your Answer
Fixed Position Layout
Project Layout
Functional Layout
Product Layout
Line Layout
Project Layout
Process Layout
Functional Layout
job layout
Combined Layout
Mixed Layout
Mixed Layout
Multiple Choice Single Answer
Question
What do you understand by the measurement of work to establish allowed time for a job for the defined method?
Correct Answer
Work measurement
Your Answer
Work measurement
Select The Blank
Question
In case of an OC curve, the risk of rejecting a good quality lot may vary between ________.
Correct Answer
0.01 to 10%
Your Answer
0.01 to 10%
True/False
Question
Objective of Work Study is to improve Productivity
Correct Answer
True
Your Answer
False
Multiple Choice Multiple Answer
Question
Which are the distinct functions of scientific quality control?
Correct Answer
Acceptance function , Preventive function , Assurance function
Your Answer
Acceptance function , Feedback function , Preventive function
Match The Following
Question
Correct Answer
Your Answer
Interruption for machine utilisation
Preventive maintenance
Preventive maintenance
Input for scheduling
Overlapping of operations
Strings
Technique of scheduling
Critical Path Analysis
Critical Path Analysis
Scheduling Device
Strings
Blackboard
Select The Blank
Question
An Ideal OC curve is ________ shaped curve that accpets all the lots with quality equal to or better than AQL .
Correct Answer
Rectangular
Your Answer
Rectangular
True/False
Question
Breakdown of machines, absenteeism of worker does not dislocate the manufacturing activity in process layout
Correct Answer
True
Your Answer
True
True/False
Question
Since value of c can never be negativee, hence" if LCLp works out to be negative, it is taken as zero."
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question
Who prepares the daily production report?
Correct Answer
Shop Supervisor
Your Answer
Worker
True/False
Question
The dispatching function is of very importance in flow and mass production units.
Correct Answer
False
Your Answer
True
Multiple Choice Multiple Answer
Question
Which are major benefits of identifying the critical path?
Correct Answer
It helps to identify the set of activities and events which are critical and as such must be carefully controlled and monitored , It identifies activities to be given preference in allocation of resources. , It helps to exercise "control by exception".
Your Answer
It helps to identify the set of activities and events which are critical and as such must be carefully controlled and monitored , It helps to exercise "control by exception".
No comments:
Post a Comment